Pulsar™

Pressure compensated pulsator.
Distributes relatively small water amounts over a large wetted area.

Pressure-compensation range: 2.5 – 4.0 bar at the micro-emitter head.
Recommended filtration: 130 micron / 120 mesh.
Filtration method is to be selected based on the kind and concentration of the dirt particles contained in the water.
Wherever sand contained in the water exceed 2 ppm, Hydrocyclon filter is to be installed before the main filter.
When sand/ silt/ clay exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team´s instructions.
Consists of a flow regulator (Pressure Compensated dripper), a micro tube connecting between the regulator and the pulsator chamber inlet, pulsator tubing with an air bag inside, AD valve and micro-emitter head according to the specific application designed for the product.
UV resistant.
Chemical resistant to standard nutrients used in agriculture.
Several techniques/ adapters/ fittings offered for installation in the field.

Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range. 100% uniformity of water distribution along the laterals.
Several pulses per minute, according to the selected flow rate, ensure continuous irrigation over a large area for many hours.
Soil saturation / flooding are avoided even after many hours of irrigation.
The water supply system including pump, filtration system, pipes and fittings is relatively small and far less expensive to purchase, install and maintain.